DTF Transfers

DTF Transfers (Direct to Film) are full color heat applied transfers for light and dark fabrics. You can apply DTF to cotton, cotton polyester blends, polyester and jeans.

They are a cold peel.
DTF Transfers are printed with a water-based ink and powder adhesive coating. This makes them very soft to the touch.
These transfers are ready for you to add to your next project.

Pressing Instructions

1. Pre-press fabric for 10 seconds to remove any moisture.

2.Place transfer and cover with Teflon sheet or parchment paper

3.Press with heavy pressure at 300-325 degrees F for 15 seconds.

4.Remove garment from press and allow to cool for at least 60 seconds

5.Slowly peel away transfer film. (If not stuck to garment put back onto heat press for an additional 10-15 seconds. Wait to cool down to peel.

6.Cover and repress transfer for another 5-10 seconds

Every Heat Press is different, temps and pressure are not always accurate or even, so adjusting for your individual press is necessary. We highly recommend a heat gun to be sure your press is the correct temp.

WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.